TOSHIBA TECRA A10-1DC Laptop Keyboard, TECRA A10-1DC keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1DC
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1DC
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1DC
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1DC keyboards tags: Tecra A9 , Tecra M10-S34 , Satellite A8 laptop keyboard , Satellite A5 , Satellite P25 laptop keyboard , Satellite P35 , Satellite A1130 , Satellite A4 , Satellite A1135 laptop keyboard , TOSHIBA Satellite P25 laptop keyboard , Equium A80 , Satellite A8 , Qosmio F25 , Satellite 2100. , Tecra A9-S901 laptop keyboard , Satellite M7 , Satellite P25 , Satellite 2100. laptop keyboard , Satellite A5 laptop keyboard , Satellite 2000 laptop keyboard , Qosmio G30 , Satellite 1130 , Tecra A9-ST90 , Satellite A2 , Satellite P20 , Satellite S1 , Qosmio F25 , TOSHIBA Satellite A115
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1DC keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1DC keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1DC keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1DC laptop keyboard, please contact us.
TOSHIBA TECRA A10-1DC notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1DC keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1DC laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.






















