TOSHIBA TECRA A10-1HZ Laptop Keyboard, TECRA A10-1HZ keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HZ
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HZ
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HZ
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1HZ keyboards tags: Satellite S3. , Satellite S205 , Satellite A1130 laptop keyboard , TOSHIBA Equium A80 , Satellite A1130 , Qosmio G35. laptop keyboard , Satellite Tecra A1 , Satellite A1135 laptop keyboard , Equium M40 laptop keyboard , Satellite A2 laptop keyboard , Satellite A35 , Satellite 2435 laptop keyboard , Satellite M3 , Satellite A6 , Satellite A60 , Satellite 2000 laptop keyboard , Satellite S1 , Satellite A6 , Satellite S2 , Satellite S3. , Satellite S1130 laptop keyboard , Equium M50 laptop keyboard , Satellite 1870 , Satellite 2000 laptop keyboard , Satellite A3 , Satellite A5 , Satellite 1130 , Qosmio F25 laptop keyboard
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1HZ keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1HZ keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1HZ keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1HZ laptop keyboard, please contact us.
TOSHIBA TECRA A10-1HZ notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1HZ keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1HZ laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.






















