TOSHIBA TECRA A11-13G Laptop Keyboard, TECRA A11-13G keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A11-13G
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A11-13G
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A11-13G
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A11-13G keyboards tags: Satellite M1 , Satellite A25 , Satellite 2000 , Satellite P35 laptop keyboard , Satellite Tecra A1 , Tecra A9 laptop keyboard , Tecra M10-S10 , Satellite A115 laptop keyboard , Satellite S205 laptop keyboard , Satellite P35 , Satellite S3. , Satellite A8 laptop keyboard , Satellite S1130 , Satellite A35 laptop keyboard , Satellite Tecra A1 , Satellite A35 laptop keyboard , TOSHIBA Satellite P20 laptop keyboard , TOSHIBA Satellite M7 laptop keyboard , Satellite M2 laptop keyboard , Satellite A35 laptop keyboard , Satellite 2410 , Satellite A120 , Tecra A9-ST9001 , Satellite 2100. , Satellite P25 laptop keyboard , Satellite M40X laptop keyboard , Satellite 2100. laptop keyboard , TOSHIBA Satellite A7 laptop keyboard
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A11-13G keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A11-13G keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A11-13G keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A11-13G laptop keyboard, please contact us.
TOSHIBA TECRA A11-13G notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A11-13G keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A11-13G laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.





















